Home >Product
【Insertion Electromagnetic Flowmeter】

AIMAG for volume flow measurement in closed conduits for conducting fluid used in petrochemical, iron and steel metallurgy, water supply and drainage, irrigation, water treatment, sewage total environmental control, paper, pharmaceutical, food and other industrial and manufacturing process flow of the agricultural sector measurement and control. AIMAG apply DN50 ~ DN8000 pipeline, online media measurement and monitoring of fluid conductivity should not be less than 20 μS / cm flow or flow rate. AIMAG measurement is not affected by fluid pressure, temperature, density and viscosity changes, containing a small amount of solid particles or gas bubbles can also be measured.
■ Length Mounting product structure is simple, reliable, commissioning and maintenance.
■ Compared with conventional pipe flow meter, a low investment cost and low installation costs.
■ Online Removable Mounting products can be kept in water at low pressure or with pressure situations easy installation and removal.
■ Can be easily installed in existing pipelines, increasing the flow measurement and monitoring is very suitable for the existing pipeline.
■ Measurement accuracy is not measured medium temperature, pressure, density, viscosity, electrical conductivity (conductivity is greater than 20μs / cm) and other effects.
■ Sensor almost no pressure loss, low energy consumption.
■ Particularly suitable for medium and large-diameter pipeline flow measurement and control.
■ Wide range of flow measurement, the full scale flow rate of 0.5m / s to 10m / s arbitrarily set, the output signal is linear with flow.
The main technical performance
1 Is suitable for measuring the nominal pipe diameter: DN50 ~ DN8000mm;
2 Velocity measurement range: 0.1 ~ 1m / s to 0.1 ~ 10m / s, full-scale range of 0.5m / s ~ 10m / s within the range of continuously adjustable.
3 Measurement accuracy: velocity v> 1m / s when, ± 1.5%; flow rate, 0.1m / s 4 Working pressure: 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa, 4.0MPa.
5 Electrode material: 316L, Hastelloy C-22, titanium and Ti.
6 Measuring tube (probe) Material: 304SS (PEEK)
7 The maximum temperature measured medium: PEEK 120 ℃
8 Shell protection grade: IP65, IP67, optional separate type IP68 (rubber seal sensor junction box, specify the cable length when ordering.).
9 Other technical performance indicators see MBmag electromagnetic flowmeter converters use manual.